zhoujie
fee2e96eaa
- 新增VSCode编辑器配置，启用保存时自动格式化 - 新增DMA2_Stream5和USART1中断处理函数，优化SPI传输性能 - 移除TIM1相关配置和性能监控模块，简化系统架构 - 优化GPIO配置，将ADC_SYNC和PA8引脚合并配置 - 简化系统监控模块，仅保留采样计数和数据溢出统计 - 优化SPI配置，使用16位数据宽度并提高DMA优先级 - 提高USART波特率（USART1:2Mbps, USART3:921600bps） - 优化LTC2508驱动，增加初始化状态检查和缓冲区大小 - 修正数据存储模块，使用校正数据包而非校正结果结构体 - 优化RS485驱动，使用中断传输并添加传输完成回调 - 更新IOC配置文件，移除TIM1并调整中断优先级配置 - 新增系统监控简化说明文档，详细记录架构变更
112 lines
2.8 KiB
C
112 lines
2.8 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file tim.c
|
|
* @brief This file provides code for the configuration
|
|
* of the TIM instances.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2026 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "tim.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
TIM_HandleTypeDef htim2;
|
|
|
|
/* TIM2 init function */
|
|
void MX_TIM2_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN TIM2_Init 0 */
|
|
|
|
/* USER CODE END TIM2_Init 0 */
|
|
|
|
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
|
|
|
/* USER CODE BEGIN TIM2_Init 1 */
|
|
|
|
/* USER CODE END TIM2_Init 1 */
|
|
htim2.Instance = TIM2;
|
|
htim2.Init.Prescaler = 83;
|
|
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
|
|
htim2.Init.Period = 999;
|
|
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
|
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
|
if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
|
if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
|
if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN TIM2_Init 2 */
|
|
|
|
/* USER CODE END TIM2_Init 2 */
|
|
|
|
}
|
|
|
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
|
|
{
|
|
|
|
if(tim_baseHandle->Instance==TIM2)
|
|
{
|
|
/* USER CODE BEGIN TIM2_MspInit 0 */
|
|
|
|
/* USER CODE END TIM2_MspInit 0 */
|
|
/* TIM2 clock enable */
|
|
__HAL_RCC_TIM2_CLK_ENABLE();
|
|
|
|
/* TIM2 interrupt Init */
|
|
HAL_NVIC_SetPriority(TIM2_IRQn, 12, 0);
|
|
HAL_NVIC_EnableIRQ(TIM2_IRQn);
|
|
/* USER CODE BEGIN TIM2_MspInit 1 */
|
|
|
|
/* USER CODE END TIM2_MspInit 1 */
|
|
}
|
|
}
|
|
|
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
|
|
{
|
|
|
|
if(tim_baseHandle->Instance==TIM2)
|
|
{
|
|
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_TIM2_CLK_DISABLE();
|
|
|
|
/* TIM2 interrupt Deinit */
|
|
HAL_NVIC_DisableIRQ(TIM2_IRQn);
|
|
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM2_MspDeInit 1 */
|
|
}
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|