1033 lines
35 KiB
C
1033 lines
35 KiB
C
#include "ch32v30x.h"
|
|
#include "string.h"
|
|
#include "eth_driver.h"
|
|
#include "dvp.h"
|
|
#include "mini212g2.h"
|
|
#include "qdx_port.h"
|
|
#include "qdx_preprocess.h"
|
|
#include "qdx_tcp_logic.h"
|
|
|
|
#include "FreeRTOS.h"
|
|
#include "task.h"
|
|
|
|
/* ============================================================
|
|
* TEST MODE: Generate simulated sensor data without real hardware.
|
|
* Set to 1 to enable test pattern generation (no sensor/DVP needed).
|
|
* Set to 0 for normal operation with real Mini212G2 sensor.
|
|
* ============================================================ */
|
|
#define TEST_PATTERN_MODE 1
|
|
|
|
/* Default burst parameters — used when server hasn't sent config yet */
|
|
#define DEFAULT_BURST_COUNT 3
|
|
#define DEFAULT_BURST_INTERVAL_MS 200
|
|
|
|
/* ============================================================
|
|
* External Trigger DI Input
|
|
* PA15 / EXTI15 / Rising Edge
|
|
* Shared by 2D and 1D external trigger (mutually exclusive).
|
|
* ============================================================ */
|
|
#define EXT_TRIG_GPIO_PORT GPIOA
|
|
#define EXT_TRIG_GPIO_PIN GPIO_Pin_15
|
|
#define EXT_TRIG_GPIO_CLK RCC_APB2Periph_GPIOA
|
|
#define EXT_TRIG_EXTI_LINE EXTI_Line15
|
|
#define EXT_TRIG_EXTI_PORT GPIO_PortSourceGPIOA
|
|
#define EXT_TRIG_EXTI_PIN GPIO_PinSource15
|
|
#define EXT_TRIG_IRQn EXTI15_10_IRQn
|
|
|
|
/* NG output GPIO: PA8 push-pull, active-high when NG detected */
|
|
#define NG_GPIO_PORT GPIOA
|
|
#define NG_GPIO_PIN GPIO_Pin_8
|
|
#define NG_GPIO_CLK RCC_APB2Periph_GPIOA
|
|
#define NG_PULSE_MS 200
|
|
|
|
/* ============================================================
|
|
* TX Buffers (double-buffered for zero-copy)
|
|
* ============================================================ */
|
|
#define MAX_TCP_PAYLOAD_SIZE 10240
|
|
uint8_t g_TxNetBuffer_A_Mem[MAX_TCP_PAYLOAD_SIZE];
|
|
uint8_t g_TxNetBuffer_B_Mem[MAX_TCP_PAYLOAD_SIZE];
|
|
|
|
TcpTxBuffer_t g_TxNetBuffer_A = {
|
|
.pBuffer = g_TxNetBuffer_A_Mem,
|
|
.TotalCapacity = MAX_TCP_PAYLOAD_SIZE,
|
|
.HeadOffset = 64,
|
|
.ValidPayloadLen = 0
|
|
};
|
|
TcpTxBuffer_t g_TxNetBuffer_B = {
|
|
.pBuffer = g_TxNetBuffer_B_Mem,
|
|
.TotalCapacity = MAX_TCP_PAYLOAD_SIZE,
|
|
.HeadOffset = 64,
|
|
.ValidPayloadLen = 0
|
|
};
|
|
|
|
/* ============================================================
|
|
* Runtime State
|
|
* ============================================================ */
|
|
extern volatile uint32_t sys_tick_ms;
|
|
|
|
/* External trigger flag — set in EXTI ISR */
|
|
static volatile uint8_t g_ext_trigger_flag = 0;
|
|
static volatile uint32_t g_ext_trigger_time_ms = 0;
|
|
|
|
/* TEMP_REQ auxiliary channel (server on-demand screenshot) */
|
|
static volatile uint8_t g_temp_req_pending = 0;
|
|
static volatile uint8_t g_temp_req_is2d = 1;
|
|
|
|
/* NG output pulse timer */
|
|
static volatile uint32_t g_ng_off_time = 0;
|
|
|
|
/* ============================================================
|
|
* 2D Burst State Machine
|
|
* ============================================================ */
|
|
static uint8_t burst_active = 0;
|
|
static uint8_t burst_remaining = 0;
|
|
static uint32_t burst_next_time_ms = 0;
|
|
static uint8_t burst_delay_pending = 0; /* waiting for DelayMs */
|
|
static uint32_t burst_delay_until_ms = 0;
|
|
static uint8_t burst_debounce_pending = 0; /* waiting for DebounceMs */
|
|
static uint32_t burst_debounce_until = 0;
|
|
|
|
/* ============================================================
|
|
* 1D Collection State Machine
|
|
*
|
|
* Protocol flow:
|
|
* External: GPIO → debounce(HighTimerLimit) → collect temp points
|
|
* → threshold start/stop → slice [LSizeStart, -RSizeStart] → send
|
|
* Internal: continuous scan → 3 consecutive hot → collect
|
|
* → threshold stop → slice → send
|
|
*
|
|
* Each DVP frame provides one temperature sample (center row max).
|
|
* ============================================================ */
|
|
typedef enum {
|
|
S1D_IDLE = 0,
|
|
S1D_DEBOUNCE,
|
|
S1D_COLLECTING,
|
|
} State1D_t;
|
|
|
|
#define MAX_1D_POINTS 512
|
|
|
|
static State1D_t s1d_state = S1D_IDLE;
|
|
static uint16_t s1d_temp_buf[MAX_1D_POINTS];
|
|
static uint16_t s1d_time_buf[MAX_1D_POINTS];
|
|
static uint16_t s1d_count = 0;
|
|
static uint8_t s1d_consec_hot = 0;
|
|
static uint8_t s1d_consec_cold = 0;
|
|
static uint32_t s1d_start_time = 0;
|
|
static uint32_t s1d_debounce_until = 0;
|
|
static uint8_t s1d_triggered = 0;
|
|
|
|
/* Pre-trigger ring buffer (3 samples) for internal 1D trigger */
|
|
static uint16_t s1d_pre_ring[3];
|
|
static uint8_t s1d_pre_idx = 0;
|
|
static uint8_t s1d_pre_count = 0;
|
|
|
|
/* ============================================================
|
|
* Callbacks
|
|
* ============================================================ */
|
|
void OnConfigUpdate(const ConfigCommon_t *common, const Config2D_t *cfg2d, const Config1D_t *cfg1d)
|
|
{
|
|
Preprocess_Settings_Change(cfg2d, cfg1d, common);
|
|
}
|
|
|
|
void OnTempFrameRequest(uint8_t is2dRequest)
|
|
{
|
|
g_temp_req_is2d = is2dRequest;
|
|
g_temp_req_pending = 1;
|
|
DBG_CFG("TempFrameReq is2d=%d\r\n", (int)is2dRequest);
|
|
}
|
|
|
|
void OnDetectionResult(uint32_t frameNumber, uint8_t resultStatus)
|
|
{
|
|
(void)frameNumber;
|
|
if (resultStatus == 0) {
|
|
ConfigCommon_t tc; Config2D_t t2; Config1D_t t1;
|
|
uint32_t pulse_ms = NG_PULSE_MS;
|
|
if (TcpLogic_GetLatestConfig(&tc, &t2, &t1) == 0 && t2.NGioDelay > 0)
|
|
pulse_ms = t2.NGioDelay;
|
|
GPIO_SetBits(NG_GPIO_PORT, NG_GPIO_PIN);
|
|
g_ng_off_time = sys_tick_ms + pulse_ms;
|
|
}
|
|
}
|
|
|
|
#define KEEPALIVE_ENABLE 1
|
|
|
|
/* ============================================================
|
|
* FLASH / SRAM 分配配置 (Option Bytes RAM_CODE_MOD[2:0])
|
|
* 修改后需复位才生效
|
|
* ============================================================ */
|
|
typedef enum {
|
|
FLASH_192_SRAM_128 = 0, /* 00x 默认 */
|
|
FLASH_224_SRAM_96, /* 01x */
|
|
FLASH_256_SRAM_64, /* 10x */
|
|
FLASH_128_SRAM_192, /* 110 */
|
|
FLASH_288_SRAM_32 /* 111 */
|
|
} FLASH_SRAM_DEFIN;
|
|
|
|
static void Config_Flash_SRAM(FLASH_SRAM_DEFIN mode)
|
|
{
|
|
uint8_t UserByte = FLASH_GetUserOptionByte() & 0xFF;
|
|
uint8_t newByte = UserByte & ~0xE0; /* clear bits [7:5] */
|
|
|
|
switch (mode) {
|
|
case FLASH_192_SRAM_128: break; /* 000 */
|
|
case FLASH_224_SRAM_96: newByte |= 0x40; break; /* 010 */
|
|
case FLASH_256_SRAM_64: newByte |= 0x80; break; /* 100 */
|
|
case FLASH_128_SRAM_192: newByte |= 0xC0; break; /* 110 */
|
|
case FLASH_288_SRAM_32: newByte |= 0xE0; break; /* 111 */
|
|
default: return;
|
|
}
|
|
|
|
if (newByte == UserByte) return; /* already configured */
|
|
|
|
FLASH_Unlock();
|
|
FLASH_ProgramOptionByteData(0x1FFFF802, newByte);
|
|
FLASH_Lock();
|
|
DBG_INIT("Flash/SRAM changed to %d, resetting...\r\n", mode);
|
|
NVIC_SystemReset();
|
|
}
|
|
|
|
u8 MACAddr[6];
|
|
u8 IPAddr[4] = {192, 168, 7, 10};
|
|
u8 GWIPAddr[4] = {192, 168, 7, 1};
|
|
u8 IPMask[4] = {255, 255, 255, 0};
|
|
u8 DESIP[4] = {192, 168, 7, 50};
|
|
u16 desport = 5512;
|
|
u16 srcport = 5511;
|
|
|
|
u8 SocketId;
|
|
u8 SocketRecvBuf[WCHNET_MAX_SOCKET_NUM][RECE_BUF_LEN];
|
|
|
|
void mStopIfError(u8 iError)
|
|
{
|
|
if (iError == WCHNET_ERR_SUCCESS) return;
|
|
DBG_ERR("WCHNET: %02X\r\n", (u16)iError);
|
|
}
|
|
|
|
void TIM2_Init(void)
|
|
{
|
|
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure = {0};
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
|
|
TIM_TimeBaseStructure.TIM_Period = WCHNETTIMERPERIOD * 1000 - 1;
|
|
TIM_TimeBaseStructure.TIM_Prescaler = SystemCoreClock / 1000000 - 1;
|
|
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
|
|
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
|
|
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
|
|
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
|
|
TIM_Cmd(TIM2, ENABLE);
|
|
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
|
|
NVIC_EnableIRQ(TIM2_IRQn);
|
|
}
|
|
|
|
|
|
/* qdx_port.c notification hooks */
|
|
extern void qdx_port_sock_recv_notify(uint8_t sockid);
|
|
extern void qdx_port_sock_connect_notify(uint8_t sockid);
|
|
extern void qdx_port_sock_disconnect_notify(uint8_t sockid);
|
|
extern void qdx_port_init(void);
|
|
extern void qdx_port_net_lock(void);
|
|
extern void qdx_port_net_unlock(void);
|
|
|
|
|
|
void WCHNET_HandleSockInt(u8 socketid, u8 intstat)
|
|
{
|
|
DBG_NET("SockInt: id=%d stat=0x%02X\r\n", socketid, intstat);
|
|
if (intstat & SINT_STAT_RECV)
|
|
{
|
|
qdx_port_sock_recv_notify(socketid);
|
|
}
|
|
if (intstat & SINT_STAT_CONNECT)
|
|
{
|
|
WCHNET_ModifyRecvBuf(socketid, (u32)SocketRecvBuf[socketid], RECE_BUF_LEN);
|
|
qdx_port_sock_connect_notify(socketid);
|
|
DBG_NET("TCP Connected, socket %d\r\n", socketid);
|
|
}
|
|
if (intstat & SINT_STAT_DISCONNECT)
|
|
{
|
|
qdx_port_sock_disconnect_notify(socketid);
|
|
DBG_NET("TCP Disconnected, socket %d\r\n", socketid);
|
|
}
|
|
if (intstat & SINT_STAT_TIM_OUT)
|
|
{
|
|
qdx_port_sock_disconnect_notify(socketid);
|
|
DBG_NET("TCP Timeout, socket %d\r\n", socketid);
|
|
}
|
|
}
|
|
|
|
void WCHNET_HandleGlobalInt(void)
|
|
{
|
|
u8 intstat;
|
|
u16 i;
|
|
u8 socketint;
|
|
intstat = WCHNET_GetGlobalInt();
|
|
DBG_NET("GlobalInt: 0x%02X\r\n", intstat);
|
|
if (intstat & GINT_STAT_UNREACH) DBG_NET("UNREACH\r\n");
|
|
if (intstat & GINT_STAT_IP_CONFLI) DBG_ERR("IP_CONFLICT\r\n");
|
|
if (intstat & GINT_STAT_PHY_CHANGE) {
|
|
i = WCHNET_GetPHYStatus();
|
|
DBG_NET("PHY: status=0x%04X %s\r\n", i,
|
|
(i & PHY_Linked_Status) ? "LINK_UP" : "LINK_DOWN");
|
|
}
|
|
if (intstat & GINT_STAT_SOCKET) {
|
|
for (i = 0; i < WCHNET_MAX_SOCKET_NUM; i++) {
|
|
socketint = WCHNET_GetSocketInt(i);
|
|
if (socketint) WCHNET_HandleSockInt(i, socketint);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* ============================================================
|
|
* Hardware Init: External Trigger GPIO (PA15 / EXTI15)
|
|
* ============================================================ */
|
|
static void ExtTrigger_GPIO_Init(void)
|
|
{
|
|
GPIO_InitTypeDef gpio = {0};
|
|
EXTI_InitTypeDef exti = {0};
|
|
|
|
RCC_APB2PeriphClockCmd(EXT_TRIG_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE);
|
|
|
|
gpio.GPIO_Pin = EXT_TRIG_GPIO_PIN;
|
|
gpio.GPIO_Mode = GPIO_Mode_IPD; /* Pull-down: idle low */
|
|
GPIO_Init(EXT_TRIG_GPIO_PORT, &gpio);
|
|
|
|
GPIO_EXTILineConfig(EXT_TRIG_EXTI_PORT, EXT_TRIG_EXTI_PIN);
|
|
|
|
exti.EXTI_Line = EXT_TRIG_EXTI_LINE;
|
|
exti.EXTI_Mode = EXTI_Mode_Interrupt;
|
|
exti.EXTI_Trigger = EXTI_Trigger_Rising;
|
|
exti.EXTI_LineCmd = ENABLE;
|
|
EXTI_Init(&exti);
|
|
|
|
NVIC_EnableIRQ(EXT_TRIG_IRQn);
|
|
}
|
|
|
|
static void NG_GPIO_Init(void)
|
|
{
|
|
GPIO_InitTypeDef gpio = {0};
|
|
RCC_APB2PeriphClockCmd(NG_GPIO_CLK, ENABLE);
|
|
gpio.GPIO_Pin = NG_GPIO_PIN;
|
|
gpio.GPIO_Mode = GPIO_Mode_Out_PP;
|
|
gpio.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_Init(NG_GPIO_PORT, &gpio);
|
|
GPIO_ResetBits(NG_GPIO_PORT, NG_GPIO_PIN);
|
|
}
|
|
|
|
/* EXTI15 ISR — external trigger rising edge (PA15) */
|
|
void EXTI15_10_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
void EXTI15_10_IRQHandler(void)
|
|
{
|
|
if (EXTI_GetITStatus(EXT_TRIG_EXTI_LINE) != RESET) {
|
|
EXTI_ClearITPendingBit(EXT_TRIG_EXTI_LINE);
|
|
g_ext_trigger_flag = 1;
|
|
g_ext_trigger_time_ms = sys_tick_ms;
|
|
}
|
|
}
|
|
|
|
/* ============================================================
|
|
* RTOS Task: Heartbeat (periodic debug print)
|
|
* ============================================================ */
|
|
static void task_heartbeat_entry(void *pvParameters)
|
|
{
|
|
(void)pvParameters;
|
|
uint32_t cnt = 0;
|
|
while (1)
|
|
{
|
|
#if TEST_PATTERN_MODE
|
|
DBG_HB("%d tick=%d TEST_MODE frm=%d\r\n",
|
|
(int)cnt++, (int)xTaskGetTickCount(),
|
|
(int)dvp_frame_count);
|
|
#else
|
|
DBG_HB("%d tick=%d dvp_frm=%d row_irq=%d\r\n",
|
|
(int)cnt++, (int)xTaskGetTickCount(),
|
|
(int)dvp_frame_count, (int)dvp_row_irq_cnt);
|
|
#endif
|
|
vTaskDelay(pdMS_TO_TICKS(2000));
|
|
}
|
|
}
|
|
|
|
/* ============================================================
|
|
* RTOS Task: WCHNET protocol stack driver (highest priority)
|
|
* ============================================================ */
|
|
static void task_wchnet_entry(void *pvParameters)
|
|
{
|
|
(void)pvParameters;
|
|
while (1)
|
|
{
|
|
qdx_port_net_lock();
|
|
WCHNET_MainTask();
|
|
if (WCHNET_QueryGlobalInt())
|
|
WCHNET_HandleGlobalInt();
|
|
qdx_port_net_unlock();
|
|
vTaskDelay(pdMS_TO_TICKS(5));
|
|
}
|
|
}
|
|
|
|
#if TEST_PATTERN_MODE
|
|
/* ============================================================
|
|
* Test Pattern Generator
|
|
* Generates simulated 256x192 Y16 thermal images at ~10 FPS.
|
|
* Pattern cycles through several types so all pipeline paths
|
|
* can be exercised.
|
|
*
|
|
* Pattern 0: Gradient (25.00~45.00°C) — baseline, no trigger
|
|
* Pattern 1: Hot center spot (90.00°C) — should trigger alarm
|
|
* Pattern 2: Uniform warm (35.00°C) — no trigger
|
|
* Pattern 3: Checkerboard with hot cells — tests ROI search
|
|
* ============================================================ */
|
|
#define TEST_FPS_DELAY_MS 100 /* ~10 FPS */
|
|
#define TEMP_RAW(deg_c) ((uint16_t)((deg_c) * 10)) /* e.g. 35.0°C → 350, 0.1°C/LSB */
|
|
|
|
static void test_fill_gradient(uint16_t *buf, uint16_t w, uint16_t h)
|
|
{
|
|
for (uint16_t y = 0; y < h; y++) {
|
|
for (uint16_t x = 0; x < w; x++) {
|
|
uint32_t pos = (uint32_t)y * w + (uint32_t)x * h;
|
|
uint16_t temp = TEMP_RAW(25.0) + (uint16_t)(pos * TEMP_RAW(20.0) / ((uint32_t)w * h));
|
|
buf[y * w + x] = temp;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void test_fill_hotspot(uint16_t *buf, uint16_t w, uint16_t h)
|
|
{
|
|
for (uint16_t y = 0; y < h; y++)
|
|
for (uint16_t x = 0; x < w; x++)
|
|
buf[y * w + x] = TEMP_RAW(28.0) + (uint16_t)((uint32_t)x * TEMP_RAW(4.0) / w);
|
|
uint16_t cx = w / 2, cy = h / 2;
|
|
for (uint16_t y = cy - 16; y < cy + 16; y++)
|
|
for (uint16_t x = cx - 16; x < cx + 16; x++)
|
|
buf[y * w + x] = TEMP_RAW(90.0);
|
|
}
|
|
|
|
static void test_fill_uniform(uint16_t *buf, uint16_t w, uint16_t h)
|
|
{
|
|
for (uint16_t y = 0; y < h; y++)
|
|
for (uint16_t x = 0; x < w; x++)
|
|
buf[y * w + x] = TEMP_RAW(35.0);
|
|
}
|
|
|
|
static void test_fill_checker(uint16_t *buf, uint16_t w, uint16_t h)
|
|
{
|
|
for (uint16_t y = 0; y < h; y++)
|
|
for (uint16_t x = 0; x < w; x++) {
|
|
uint8_t cell = ((y / 32) + (x / 32)) & 1;
|
|
buf[y * w + x] = cell ? TEMP_RAW(85.0) : TEMP_RAW(28.0);
|
|
}
|
|
}
|
|
|
|
static void task_test_pattern_entry(void *pvParameters)
|
|
{
|
|
(void)pvParameters;
|
|
uint32_t frame_num = 0;
|
|
uint8_t pattern_idx = 0;
|
|
/* Cycle: gradient x20, hotspot x5, uniform x10, checker x5 */
|
|
const uint8_t pattern_seq[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
|
|
1,1,1,1,1,
|
|
2,2,2,2,2,2,2,2,2,2,
|
|
3,3,3,3,3};
|
|
const uint8_t seq_len = sizeof(pattern_seq);
|
|
|
|
while (1)
|
|
{
|
|
uint16_t *buf = (uint16_t *)FrameBuffer;
|
|
switch (pattern_seq[pattern_idx % seq_len]) {
|
|
case 0: test_fill_gradient(buf, SENSOR_WIDTH, SENSOR_HEIGHT); break;
|
|
case 1: test_fill_hotspot(buf, SENSOR_WIDTH, SENSOR_HEIGHT); break;
|
|
case 2: test_fill_uniform(buf, SENSOR_WIDTH, SENSOR_HEIGHT); break;
|
|
case 3: test_fill_checker(buf, SENSOR_WIDTH, SENSOR_HEIGHT); break;
|
|
}
|
|
pattern_idx++;
|
|
if (pattern_idx >= seq_len) pattern_idx = 0;
|
|
|
|
frame_num++;
|
|
dvp_frame_count = frame_num;
|
|
Ready_Frame_Count = frame_num;
|
|
Frame_Ready_Flag = 1;
|
|
|
|
vTaskDelay(pdMS_TO_TICKS(TEST_FPS_DELAY_MS));
|
|
}
|
|
}
|
|
#endif /* TEST_PATTERN_MODE */
|
|
|
|
/* ============================================================
|
|
* Business Logic Helpers
|
|
* ============================================================ */
|
|
|
|
/*
|
|
* Extract one representative temperature from a raw frame for 1D.
|
|
* Uses max temperature of the center row.
|
|
*/
|
|
static uint16_t get_1d_sample(const RawImageBuffer_t *raw)
|
|
{
|
|
uint16_t w = raw->Width;
|
|
uint16_t h = raw->Height;
|
|
uint16_t row = h / 2;
|
|
uint16_t *src = raw->pData;
|
|
uint16_t max_temp = 0;
|
|
for (uint16_t x = 0; x < w; x++) {
|
|
uint16_t t = src[row * w + x];
|
|
if (t > max_temp) max_temp = t;
|
|
}
|
|
return max_temp;
|
|
}
|
|
|
|
/*
|
|
* Reset 1D state machine to idle.
|
|
*/
|
|
static void reset_1d_state(void)
|
|
{
|
|
s1d_state = S1D_IDLE;
|
|
s1d_count = 0;
|
|
s1d_consec_hot = 0;
|
|
s1d_consec_cold = 0;
|
|
s1d_triggered = 0;
|
|
s1d_pre_idx = 0;
|
|
s1d_pre_count = 0;
|
|
}
|
|
|
|
/*
|
|
* Pack collected 1D samples and send via TCP.
|
|
* Applies slicing: [LSizeStart, count - RSizeStart]
|
|
*/
|
|
static void send_1d_collection(const Config1D_t *cfg, uint8_t *use_buf_a)
|
|
{
|
|
uint16_t start = cfg->LSizeStart;
|
|
uint16_t end = s1d_count;
|
|
if (cfg->RSizeStart > 0 && cfg->RSizeStart < end)
|
|
end -= cfg->RSizeStart;
|
|
if (start >= end) {
|
|
DBG_ERR("1D: slice empty start=%d end=%d\r\n", (int)start, (int)end);
|
|
return;
|
|
}
|
|
uint16_t n = end - start;
|
|
|
|
TcpTxBuffer_t *tx_buf = (*use_buf_a) ? &g_TxNetBuffer_A : &g_TxNetBuffer_B;
|
|
*use_buf_a = !(*use_buf_a);
|
|
tx_buf->ValidPayloadLen = 0;
|
|
uint8_t *dest = tx_buf->pBuffer + tx_buf->HeadOffset;
|
|
uint32_t capacity = tx_buf->TotalCapacity - tx_buf->HeadOffset;
|
|
if ((uint32_t)n * 4 > capacity)
|
|
n = (uint16_t)(capacity / 4);
|
|
|
|
int16_t min_t = 32767, max_t = -32768;
|
|
int32_t sum_t = 0;
|
|
|
|
for (uint16_t i = 0; i < n; i++) {
|
|
uint16_t idx = start + i;
|
|
uint16_t temp = s1d_temp_buf[idx];
|
|
uint16_t toff = s1d_time_buf[idx];
|
|
int16_t t = (int16_t)temp;
|
|
if (t < min_t) min_t = t;
|
|
if (t > max_t) max_t = t;
|
|
sum_t += t;
|
|
dest[0] = (uint8_t)(toff & 0xFF);
|
|
dest[1] = (uint8_t)((toff >> 8) & 0xFF);
|
|
dest[2] = (uint8_t)(temp & 0xFF);
|
|
dest[3] = (uint8_t)((temp >> 8) & 0xFF);
|
|
dest += 4;
|
|
}
|
|
tx_buf->ValidPayloadLen = (uint32_t)n * 4;
|
|
|
|
PreprocessResult_t meta;
|
|
memset(&meta, 0, sizeof(meta));
|
|
meta.pValidData = tx_buf->pBuffer + tx_buf->HeadOffset;
|
|
meta.DataLength = tx_buf->ValidPayloadLen;
|
|
meta.ValidWidth = n;
|
|
meta.ValidHeight = 1;
|
|
meta.MinTemp = min_t;
|
|
meta.MaxTemp = max_t;
|
|
meta.AvgTemp = (int16_t)(sum_t / (n > 0 ? n : 1));
|
|
meta.RoiTemp = meta.AvgTemp;
|
|
meta.FrameNumber = Ready_Frame_Count;
|
|
|
|
int8_t ret = TcpLogic_BuildAndSendTemperatureFrame(tx_buf, &meta, 0x01, 0);
|
|
DBG_DATA("1D SEND n=%d slice=[%d,%d) ret=%d\r\n",
|
|
(int)n, (int)start, (int)end, (int)ret);
|
|
}
|
|
|
|
/*
|
|
* Spatial 1D snapshot for TEMP_REQ — samples points across center row.
|
|
*/
|
|
#define SNAPSHOT_1D_POINTS 30
|
|
|
|
static void send_1d_snapshot(const RawImageBuffer_t *raw, uint8_t *use_buf_a)
|
|
{
|
|
uint16_t w = raw->Width;
|
|
uint16_t h = raw->Height;
|
|
uint16_t *src = raw->pData;
|
|
uint16_t row = h / 2;
|
|
|
|
TcpTxBuffer_t *tx_buf = (*use_buf_a) ? &g_TxNetBuffer_A : &g_TxNetBuffer_B;
|
|
*use_buf_a = !(*use_buf_a);
|
|
tx_buf->ValidPayloadLen = 0;
|
|
uint8_t *dest = tx_buf->pBuffer + tx_buf->HeadOffset;
|
|
uint32_t capacity = tx_buf->TotalCapacity - tx_buf->HeadOffset;
|
|
uint16_t points = SNAPSHOT_1D_POINTS;
|
|
if (points > w) points = w;
|
|
if ((uint32_t)points * 4 > capacity)
|
|
points = (uint16_t)(capacity / 4);
|
|
|
|
int16_t min_t = 32767, max_t = -32768;
|
|
int32_t sum_t = 0;
|
|
|
|
for (uint16_t i = 0; i < points; i++) {
|
|
uint16_t col = (uint16_t)((uint32_t)i * (w - 1) / (points > 1 ? points - 1 : 1));
|
|
uint16_t temp = src[row * w + col];
|
|
uint16_t time_offset = (uint16_t)((uint32_t)i * 600 / (points > 1 ? points - 1 : 1));
|
|
int16_t t = (int16_t)temp;
|
|
if (t < min_t) min_t = t;
|
|
if (t > max_t) max_t = t;
|
|
sum_t += t;
|
|
dest[0] = (uint8_t)(time_offset & 0xFF);
|
|
dest[1] = (uint8_t)((time_offset >> 8) & 0xFF);
|
|
dest[2] = (uint8_t)(temp & 0xFF);
|
|
dest[3] = (uint8_t)((temp >> 8) & 0xFF);
|
|
dest += 4;
|
|
}
|
|
tx_buf->ValidPayloadLen = (uint32_t)points * 4;
|
|
|
|
PreprocessResult_t meta;
|
|
memset(&meta, 0, sizeof(meta));
|
|
meta.pValidData = tx_buf->pBuffer + tx_buf->HeadOffset;
|
|
meta.DataLength = tx_buf->ValidPayloadLen;
|
|
meta.ValidWidth = points;
|
|
meta.ValidHeight = 1;
|
|
meta.MinTemp = min_t;
|
|
meta.MaxTemp = max_t;
|
|
meta.AvgTemp = (int16_t)(sum_t / (points > 0 ? points : 1));
|
|
meta.RoiTemp = meta.AvgTemp;
|
|
meta.FrameNumber = raw->FrameNumber;
|
|
|
|
int8_t ret = TcpLogic_BuildAndSendTemperatureFrame(tx_buf, &meta, 0x01, 0);
|
|
DBG_DATA("1D snapshot n=%d ret=%d\r\n", (int)points, (int)ret);
|
|
}
|
|
|
|
/*
|
|
* Capture and send one 2D frame (used during burst sequence).
|
|
*/
|
|
static void do_2d_capture_send(const RawImageBuffer_t *raw, uint8_t *use_buf_a)
|
|
{
|
|
TcpTxBuffer_t *tx_buf = (*use_buf_a) ? &g_TxNetBuffer_A : &g_TxNetBuffer_B;
|
|
*use_buf_a = !(*use_buf_a);
|
|
tx_buf->ValidPayloadLen = 0;
|
|
|
|
PreprocessResult_t meta;
|
|
int8_t pp_ret = Preprocess_Execute(raw, tx_buf, &meta);
|
|
if (pp_ret == 0) {
|
|
int8_t tx_ret = TcpLogic_BuildAndSendTemperatureFrame(tx_buf, &meta, 0x01, 1);
|
|
DBG_DATA("2D SEND frm=%d %dx%d ret=%d\r\n",
|
|
(int)meta.FrameNumber, (int)meta.ValidWidth,
|
|
(int)meta.ValidHeight, (int)tx_ret);
|
|
} else {
|
|
DBG_ERR("2D PP fail ret=%d\r\n", (int)pp_ret);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Start a 2D burst: capture first frame, then queue remaining.
|
|
*/
|
|
static void start_2d_burst(const RawImageBuffer_t *raw, const Config2D_t *t2, uint8_t *use_buf_a)
|
|
{
|
|
DBG_TRIG("TRIGGER frm=%d\r\n", (int)raw->FrameNumber);
|
|
do_2d_capture_send(raw, use_buf_a);
|
|
|
|
uint8_t total = DEFAULT_BURST_COUNT;
|
|
uint16_t interval = DEFAULT_BURST_INTERVAL_MS;
|
|
if (t2->TriggerBurstCount >= 1)
|
|
total = t2->TriggerBurstCount;
|
|
if (t2->TriggerInternalIntervalMs > 0)
|
|
interval = t2->TriggerInternalIntervalMs;
|
|
|
|
if (total > 1) {
|
|
burst_active = 1;
|
|
burst_remaining = total - 1;
|
|
burst_next_time_ms = sys_tick_ms + interval;
|
|
DBG_TRIG("Burst start: %d frames, interval=%d ms\r\n",
|
|
(int)total, (int)interval);
|
|
}
|
|
}
|
|
|
|
/* ============================================================
|
|
* 2D Trigger Handler — called once per frame when Config2D enabled
|
|
*
|
|
* State machine phases:
|
|
* 1. Debounce wait (external trigger: DebounceIntervalMs)
|
|
* 2. Delay wait (DelayMs after trigger confirmation)
|
|
* 3. Burst capture (BurstCount frames at InternalIntervalMs)
|
|
* 4. Idle — check for new trigger (external GPIO or internal temp)
|
|
* ============================================================ */
|
|
static void handle_2d_trigger(const RawImageBuffer_t *raw, const Config2D_t *t2, uint8_t *use_buf_a)
|
|
{
|
|
/* Phase 1: debounce wait (external trigger only) */
|
|
if (burst_debounce_pending) {
|
|
if (sys_tick_ms < burst_debounce_until)
|
|
return;
|
|
burst_debounce_pending = 0;
|
|
if (t2->TriggerDelayMs > 0) {
|
|
burst_delay_pending = 1;
|
|
burst_delay_until_ms = sys_tick_ms + t2->TriggerDelayMs;
|
|
} else {
|
|
start_2d_burst(raw, t2, use_buf_a);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* Phase 2: delay wait */
|
|
if (burst_delay_pending) {
|
|
if (sys_tick_ms < burst_delay_until_ms)
|
|
return;
|
|
burst_delay_pending = 0;
|
|
start_2d_burst(raw, t2, use_buf_a);
|
|
return;
|
|
}
|
|
|
|
/* Phase 3: ongoing burst — send remaining frames */
|
|
if (burst_active) {
|
|
if (sys_tick_ms >= burst_next_time_ms) {
|
|
do_2d_capture_send(raw, use_buf_a);
|
|
burst_remaining--;
|
|
if (burst_remaining == 0) {
|
|
burst_active = 0;
|
|
DBG_TRIG("Burst complete\r\n");
|
|
} else {
|
|
uint16_t interval = DEFAULT_BURST_INTERVAL_MS;
|
|
if (t2->TriggerInternalIntervalMs > 0)
|
|
interval = t2->TriggerInternalIntervalMs;
|
|
burst_next_time_ms = sys_tick_ms + interval;
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* Phase 4: check for new trigger */
|
|
if (t2->TriggerMode == 0) {
|
|
/* --- External trigger --- */
|
|
if (g_ext_trigger_flag) {
|
|
g_ext_trigger_flag = 0;
|
|
DBG_TRIG("2D ext trigger\r\n");
|
|
if (t2->TriggerDebounceIntervalMs > 0) {
|
|
burst_debounce_pending = 1;
|
|
burst_debounce_until = sys_tick_ms + t2->TriggerDebounceIntervalMs;
|
|
} else if (t2->TriggerDelayMs > 0) {
|
|
burst_delay_pending = 1;
|
|
burst_delay_until_ms = sys_tick_ms + t2->TriggerDelayMs;
|
|
} else {
|
|
start_2d_burst(raw, t2, use_buf_a);
|
|
}
|
|
}
|
|
} else {
|
|
/* --- Internal trigger: temperature threshold in TriggerRoi --- */
|
|
if (Preprocess_CheckInternalTrigger2D(raw) == 1) {
|
|
DBG_TRIG("2D internal trigger\r\n");
|
|
if (t2->TriggerDelayMs > 0) {
|
|
burst_delay_pending = 1;
|
|
burst_delay_until_ms = sys_tick_ms + t2->TriggerDelayMs;
|
|
} else {
|
|
start_2d_burst(raw, t2, use_buf_a);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* ============================================================
|
|
* 1D Trigger Handler — called once per frame when Config1D enabled
|
|
*
|
|
* Each DVP frame yields one temperature sample (center row max).
|
|
* The state machine collects samples over time, starting/stopping
|
|
* based on temperature threshold crossings.
|
|
* ============================================================ */
|
|
static void handle_1d_trigger(const RawImageBuffer_t *raw, const Config1D_t *t1, uint8_t *use_buf_a)
|
|
{
|
|
/* RunMode: 0=STOP, 1=RUN. Only collect when running. */
|
|
if (t1->RunMode != 1)
|
|
return;
|
|
|
|
uint16_t sample = get_1d_sample(raw);
|
|
int16_t thresh = t1->TriggerTempLimit;
|
|
uint8_t is_hot = ((int16_t)sample >= thresh) ? 1 : 0;
|
|
|
|
switch (s1d_state) {
|
|
case S1D_IDLE:
|
|
if (t1->TriggerType == 0) {
|
|
/* --- External trigger --- */
|
|
if (g_ext_trigger_flag) {
|
|
g_ext_trigger_flag = 0;
|
|
s1d_debounce_until = sys_tick_ms + t1->HighTimerLimit;
|
|
s1d_state = S1D_DEBOUNCE;
|
|
DBG_TRIG("1D: ext trigger -> debounce %d ms\r\n",
|
|
(int)t1->HighTimerLimit);
|
|
}
|
|
} else {
|
|
/* --- Internal trigger: scan with pre-ring buffer --- */
|
|
s1d_pre_ring[s1d_pre_idx] = sample;
|
|
s1d_pre_idx = (s1d_pre_idx + 1) % 3;
|
|
if (s1d_pre_count < 3) s1d_pre_count++;
|
|
|
|
if (s1d_pre_count >= 3) {
|
|
uint8_t all_hot = 1;
|
|
for (uint8_t i = 0; i < 3; i++) {
|
|
if ((int16_t)s1d_pre_ring[i] < thresh) {
|
|
all_hot = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (all_hot) {
|
|
/* 3 consecutive hot samples → start collecting */
|
|
s1d_count = 0;
|
|
s1d_start_time = sys_tick_ms;
|
|
/* Copy pre-ring into buffer (oldest first) */
|
|
for (uint8_t i = 0; i < 3; i++) {
|
|
uint8_t ri = (s1d_pre_idx + i) % 3;
|
|
s1d_temp_buf[s1d_count] = s1d_pre_ring[ri];
|
|
s1d_time_buf[s1d_count] = 0;
|
|
s1d_count++;
|
|
}
|
|
s1d_consec_cold = 0;
|
|
s1d_consec_hot = 3;
|
|
s1d_triggered = 1;
|
|
s1d_state = S1D_COLLECTING;
|
|
DBG_TRIG("1D: internal trigger start\r\n");
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case S1D_DEBOUNCE:
|
|
if (sys_tick_ms >= s1d_debounce_until) {
|
|
s1d_count = 0;
|
|
s1d_start_time = sys_tick_ms;
|
|
s1d_consec_hot = 0;
|
|
s1d_consec_cold = 0;
|
|
s1d_triggered = 0;
|
|
s1d_state = S1D_COLLECTING;
|
|
DBG_TRIG("1D: debounce done -> collecting\r\n");
|
|
}
|
|
break;
|
|
|
|
case S1D_COLLECTING: {
|
|
if (s1d_count < MAX_1D_POINTS) {
|
|
s1d_temp_buf[s1d_count] = sample;
|
|
s1d_time_buf[s1d_count] = (uint16_t)(sys_tick_ms - s1d_start_time);
|
|
s1d_count++;
|
|
}
|
|
|
|
if (is_hot) {
|
|
s1d_consec_hot++;
|
|
s1d_consec_cold = 0;
|
|
if (!s1d_triggered && s1d_consec_hot >= 3)
|
|
s1d_triggered = 1;
|
|
} else {
|
|
s1d_consec_cold++;
|
|
s1d_consec_hot = 0;
|
|
}
|
|
|
|
/* Stop conditions */
|
|
uint8_t stop = 0;
|
|
if (s1d_count >= MAX_1D_POINTS)
|
|
stop = 1;
|
|
if (t1->BufferSize > 0 && s1d_count >= t1->BufferSize)
|
|
stop = 1;
|
|
if (s1d_triggered && t1->NgCountLimit > 0 &&
|
|
s1d_consec_cold >= t1->NgCountLimit)
|
|
stop = 1;
|
|
|
|
if (stop) {
|
|
if (s1d_triggered) {
|
|
send_1d_collection(t1, use_buf_a);
|
|
} else {
|
|
DBG_DATA("1D: buf full, not triggered — discard %d pts\r\n",
|
|
(int)s1d_count);
|
|
}
|
|
reset_1d_state();
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* ============================================================
|
|
* RTOS Task: Business logic (DVP + trigger + send)
|
|
*
|
|
* Main pipeline — behavior is entirely driven by server config:
|
|
* Config2D.Enabled → 2D autonomous trigger pipeline (priority)
|
|
* Config1D.Enabled → 1D autonomous collection pipeline
|
|
* TEMP_REQ → auxiliary on-demand screenshot (always available)
|
|
* ============================================================ */
|
|
static void task_business_entry(void *pvParameters)
|
|
{
|
|
(void)pvParameters;
|
|
static uint8_t use_buffer_A = 1;
|
|
|
|
while (1)
|
|
{
|
|
/* NG pulse off check */
|
|
if (g_ng_off_time && sys_tick_ms >= g_ng_off_time) {
|
|
GPIO_ResetBits(NG_GPIO_PORT, NG_GPIO_PIN);
|
|
g_ng_off_time = 0;
|
|
}
|
|
|
|
#if !TEST_PATTERN_MODE
|
|
DVP_Task();
|
|
#endif
|
|
|
|
/* -------- Auxiliary: TEMP_REQ (server on-demand screenshot) -------- */
|
|
if (g_temp_req_pending)
|
|
{
|
|
g_temp_req_pending = 0;
|
|
|
|
ConfigCommon_t tc; Config2D_t t2; Config1D_t t1;
|
|
uint8_t ok = 0;
|
|
if (TcpLogic_GetLatestConfig(&tc, &t2, &t1) == 0) {
|
|
if (g_temp_req_is2d && t2.Enabled) ok = 1;
|
|
if (!g_temp_req_is2d && t1.Enabled) ok = 1;
|
|
}
|
|
|
|
if (!ok) {
|
|
DBG_ERR("TEMP_REQ ignored: %s not enabled\r\n",
|
|
g_temp_req_is2d ? "2D" : "1D");
|
|
} else {
|
|
RawImageBuffer_t raw_img;
|
|
raw_img.pData = (uint16_t *)FrameBuffer;
|
|
raw_img.Width = SENSOR_WIDTH;
|
|
raw_img.Height = SENSOR_HEIGHT;
|
|
raw_img.FrameNumber = Ready_Frame_Count;
|
|
|
|
if (g_temp_req_is2d) {
|
|
TcpTxBuffer_t *tx_buf = use_buffer_A ? &g_TxNetBuffer_A : &g_TxNetBuffer_B;
|
|
use_buffer_A = !use_buffer_A;
|
|
tx_buf->ValidPayloadLen = 0;
|
|
PreprocessResult_t meta;
|
|
int8_t pp_ret = Preprocess_Execute(&raw_img, tx_buf, &meta);
|
|
if (pp_ret == 0) {
|
|
int8_t tx_ret = TcpLogic_BuildAndSendTemperatureFrame(
|
|
tx_buf, &meta, 0x02, 1);
|
|
DBG_DATA("TEMP_REQ 2D frm=%d %dx%d ret=%d\r\n",
|
|
(int)meta.FrameNumber, (int)meta.ValidWidth,
|
|
(int)meta.ValidHeight, (int)tx_ret);
|
|
} else {
|
|
DBG_ERR("TEMP_REQ PP fail ret=%d\r\n", (int)pp_ret);
|
|
}
|
|
} else {
|
|
send_1d_snapshot(&raw_img, &use_buffer_A);
|
|
DBG_DATA("TEMP_REQ 1D frm=%d\r\n", (int)raw_img.FrameNumber);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* -------- Main pipeline: autonomous trigger -------- */
|
|
if (Frame_Ready_Flag)
|
|
{
|
|
Frame_Ready_Flag = 0;
|
|
|
|
RawImageBuffer_t raw_img;
|
|
raw_img.pData = (uint16_t *)FrameBuffer;
|
|
raw_img.Width = SENSOR_WIDTH;
|
|
raw_img.Height = SENSOR_HEIGHT;
|
|
raw_img.FrameNumber = Ready_Frame_Count;
|
|
|
|
ConfigCommon_t tc; Config2D_t t2; Config1D_t t1;
|
|
int8_t has_cfg = TcpLogic_GetLatestConfig(&tc, &t2, &t1);
|
|
|
|
if (has_cfg == 0 && t2.Enabled) {
|
|
/* 2D mode — autonomous trigger pipeline */
|
|
handle_2d_trigger(&raw_img, &t2, &use_buffer_A);
|
|
} else if (has_cfg == 0 && t1.Enabled) {
|
|
/* 1D mode — autonomous collection pipeline */
|
|
handle_1d_trigger(&raw_img, &t1, &use_buffer_A);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
vTaskDelay(pdMS_TO_TICKS(2));
|
|
}
|
|
}
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
u8 i;
|
|
SystemCoreClockUpdate();
|
|
Delay_Init();
|
|
USART_Printf_Init(921600);
|
|
DBG_INIT("TCPClient SystemClk:%d\r\n", SystemCoreClock);
|
|
DBG_INIT("TEST_PATTERN=%d\r\n", TEST_PATTERN_MODE);
|
|
DBG_INIT("UserByte: %02x\r\n", FLASH_GetUserOptionByte() & 0xFF);
|
|
Config_Flash_SRAM(FLASH_128_SRAM_192);
|
|
DBG_INIT("net version:%x\r\n", WCHNET_GetVer());
|
|
if (WCHNET_LIB_VER != WCHNET_GetVer()) DBG_ERR("net version mismatch\r\n");
|
|
|
|
WCHNET_GetMacAddr(MACAddr);
|
|
DBG_INIT("mac addr: %x:%x:%x:%x:%x:%x\r\n",
|
|
MACAddr[0], MACAddr[1], MACAddr[2],
|
|
MACAddr[3], MACAddr[4], MACAddr[5]);
|
|
|
|
#if TEST_PATTERN_MODE
|
|
DBG_INIT("=== TEST PATTERN MODE ===\r\n");
|
|
#else
|
|
/* 模组已通过 USB 预配置，无需 MCU UART 配置，直接初始化 DVP */
|
|
DVP_Init();
|
|
#endif
|
|
TIM2_Init();
|
|
ExtTrigger_GPIO_Init();
|
|
NG_GPIO_Init();
|
|
|
|
i = ETH_LibInit(IPAddr, GWIPAddr, IPMask, MACAddr);
|
|
mStopIfError(i);
|
|
if (i == WCHNET_ERR_SUCCESS) DBG_INIT("WCHNET_LibInit OK\r\n");
|
|
|
|
#if KEEPALIVE_ENABLE
|
|
{
|
|
struct _KEEP_CFG cfg = {20000, 15000, 9};
|
|
WCHNET_ConfigKeepLive(&cfg);
|
|
}
|
|
#endif
|
|
|
|
qdx_port_init();
|
|
Preprocess_Init(SENSOR_WIDTH, SENSOR_HEIGHT);
|
|
|
|
TcpLogic_Init(MACAddr, NULL);
|
|
TcpLogic_RegisterConfigCallback(OnConfigUpdate);
|
|
TcpLogic_RegisterDetectionCallback(OnDetectionResult);
|
|
TcpLogic_RegisterTempFrameRequestCallback(OnTempFrameRequest);
|
|
|
|
#if TEST_PATTERN_MODE
|
|
/* Inject test config so autonomous trigger works without server.
|
|
* TcpLogic_InjectTestConfig → caches config + fires OnConfigUpdate
|
|
* → Preprocess_Settings_Change. */
|
|
{
|
|
Config2D_t test_cfg2d;
|
|
memset(&test_cfg2d, 0, sizeof(test_cfg2d));
|
|
test_cfg2d.Enabled = 1;
|
|
test_cfg2d.TriggerMode = 1; /* Internal trigger */
|
|
test_cfg2d.TargetWidth = 64;
|
|
test_cfg2d.TargetHeight = 64;
|
|
test_cfg2d.TriggerRoiX = 0;
|
|
test_cfg2d.TriggerRoiY = 0;
|
|
test_cfg2d.TriggerRoiW = SENSOR_WIDTH;
|
|
test_cfg2d.TriggerRoiH = SENSOR_HEIGHT;
|
|
test_cfg2d.TriggerCondition = 1; /* Max temperature */
|
|
test_cfg2d.TriggerTemperatureThreshold = 800; /* 80.0°C */
|
|
test_cfg2d.TriggerBurstCount = 3;
|
|
test_cfg2d.TriggerInternalIntervalMs = 200;
|
|
test_cfg2d.NGioDelay = 200;
|
|
TcpLogic_InjectTestConfig(NULL, &test_cfg2d, NULL);
|
|
DBG_INIT("TestCfg injected: En=1 IntTrig thresh=800 Tgt=64x64 burst=3\r\n");
|
|
}
|
|
#endif
|
|
|
|
DBG_INIT("TcpLogic_Start...\r\n");
|
|
TcpLogic_Start();
|
|
|
|
DBG_INIT("Creating RTOS tasks...\r\n");
|
|
xTaskCreate(task_wchnet_entry, "wchnet", 512, NULL, 6, NULL);
|
|
xTaskCreate(task_business_entry, "business", 512, NULL, 5, NULL);
|
|
xTaskCreate(task_heartbeat_entry, "hb", 256, NULL, 3, NULL);
|
|
#if TEST_PATTERN_MODE
|
|
xTaskCreate(task_test_pattern_entry, "testpat", 256, NULL, 4, NULL);
|
|
#endif
|
|
DBG_INIT("Starting scheduler\r\n");
|
|
vTaskStartScheduler();
|
|
|
|
/* Should never reach here */
|
|
while (1) {}
|
|
}
|